8BVI0660HWS0.008-1 B&R Electronic Components

Product Details

• Weight10.85 kg
• Slots for plug-in modules
  2
• Max. power consumption
  27 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
• Terminal cable cross section dimension of shield connection
  12 to 50 mm
• OSSD signal connections
  Permitted ; Max. test pulse length: 500 µs
• Protective measures Short-circuit and ground fault protection
  Yes
• Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
  Max. 100 µs
• Relative humidity Operation
  5 to 85%
• Dimensions Width
  213.5 mm
• Continuous power consumption
  48.8 kW
• Max. output frequency
  598 Hz
• Possible switching frequencies
  5 / 10 / 20 kHz
• Input current at nominal voltage
  Approx. 30 mA
• Module width
  4
• Reduction of continuous current depending on switching frequency Switching frequency 20 kHz
  0.56 A/K (starting at -90°C)
• Max. motor line length depending on switching frequency Switching frequency 20 kHz
  25 m
• Electrical isolation Input - Inverter module
  Yes
• Installation elevation above sea level Maximum
  4000 m
• Dimensions Height
  317 mm
• Cooling and mounting type
  Wall mounting
Continuous current per motor connection
66 Aeff
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Circuit
Sink
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Protective measures Overload protection
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Relative humidity Transport
Max. 95% at 40°C
DC bus capacitance
1980 µF
Max. internal resistance
0.15 Ω
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Certifications Functional safety
Yes
Power dissipation depending on switching frequency Switching frequency 10 kHz
In preparation
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Permissible mounting orientations Horizontal, face up
Yes
Dimensions Depth Wall mounting
263 mm
Input capacitance
32.9 µF
Peak current
132 Aeff
Discharge capacitance
0.44 µF
Certifications UL
cULus E225616; Power conversion equipment
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
6.6 Aeff per 1000 m
Switching threshold High
>15 V
Protective measures Undervoltage monitoring
Yes
Temperature Transport
-25 to 70°C
Input voltage
25 VDC ±1.6%
Output voltage
24 VDC +5.8% / -0%
Max. extinction energy per switching operation
3 Ws
Power dissipation depending on switching frequency Switching frequency 20 kHz
In preparation
Protective measures Overload and short-circuit protection
Yes
Switching threshold Low
<5 V
Permissible mounting orientations Standing horizontally
No
Continuous power per motor connection
48 kW
Variant
ACOPOSmulti backplane
Overvoltage category per EN 61800-5-1
III
Voltage Nominal
750 VDC
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
1.4 A/K (starting at 41°C)
Variant Shield connection
Yes
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Relative humidity Storage
5 to 95%
Quantity
2
Continuous current
4.2 A
Max. switching frequency
0.5 Hz
Power dissipation depending on switching frequency Switching frequency 5 kHz
In preparation
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Protective measures Open-circuit monitoring
Yes
Input voltage Maximum
30 VDC
Installation elevation above sea level Nominal
0 to 500 m
B&R ID code
0x2C22
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Extinction potential
Approx. 30 V
Certifications CE
Yes
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Nominal switching frequency
5 kHz
Modulation compared to ground potential
Max. ±38 V
Response threshold for open-circuit monitoring
Approx. 0.5 A
Degree of protection per EN 60529
IP20
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.92 A/K (starting at -5°C)
Connection cross section range Flexible and fine-stranded wires
---
Input voltage Nominal
24 VDC
Temperature Storage
-25 to 55°C
Temperature Operation Nominal
5 to 40°C
Variant U, V, W, PE
M8 threaded bolts
Electrical isolation Input - Input
Yes
Permissible mounting orientations Hanging vertically
Yes
Temperature Operation Maximum
55°C

Related documents 8BVI0660HWS0.008-1 Specs