8BVI0014HWDS.000-3 B&R Electronic Components
Part#:8BVI0014HWDS.000-3
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti3 SafeMOTION EnDat 2.2 inverter module, 1.9 A, AS, wall mounting, 2 axes, optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
Check out the 8BVI0014HWDS.000-3 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight2.8 kg
- Cooling and mounting type Wall mounting
- Quantity 2
- Continuous current 1.1 A
- Type EnDat 2.2
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Variant Shield connection Yes
- Encoder power supply Load capacity 350 mA
- Temperature Transport -25 to 70°C
- Relative humidity Transport Max. 95% at 40°C
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Extinction potential Approx. 30 V
- Status indicators UP/DN LEDs
- Circuit Sink
- Certifications EAC Yes
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz No reduction
- Electrical isolation Encoder - ACOPOSmulti No
- Switching threshold Low <5 V
- Permissible mounting orientations Standing horizontally No
- Dimensions Depth Wall mounting 263 mm
- Continuous power per motor connection 1.4 kW
- Output voltage 24 VDC +5.8% / -0%
- Response threshold for open-circuit monitoring Approx. 0.25 A
- Encoder monitoring Yes
- Discharge capacitance 0.2 µF
- Degree of protection per EN 60529 IP20
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.11 A/K (starting at 15°C)
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Input voltage Maximum 30 VDC
- Installation elevation above sea level Maximum 4000 m
- Slots for plug-in modules 2
- Continuous current per motor connection 1.9 Aeff
- Max. switching frequency 0.5 Hz
- Certifications CE Yes
- Voltage Nominal 750 VDC
- Protective measures Overload and short-circuit protection Yes
- Permissible mounting orientations Horizontal, face up Yes
- Input voltage Nominal 24 VDC
- Terminal connection cross section Approbation data CSA 28 to 10
- Input capacitance 23.5 µF
- B&R ID code 0xAA0D
- Possible switching frequencies 5 / 10 / 20 kHz
- Overvoltage category per EN 61800-5-1 III
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz No reduction
- Encoder power supply Output voltage Typ. 12.5 V
- Protective measures Undervoltage monitoring Yes
- Installation elevation above sea level Nominal 0 to 500 m
- Temperature Operation Nominal 5 to 40°C
- Peak current per motor connection 4.7 Aeff
- Response threshold for undervoltage monitoring 24 VDC -2% / -4%
- Max. power consumption per encoder interface PSMC[W] = 19 V * IEncoder[A]
- Certifications Functional safety Yes (openSAFETY)
- Power dissipation depending on switching frequency Switching frequency 10 kHz [2.56 * IM² + 2.8 * IM + 200] W
- Protective measures Overload protection Yes
- Electrical isolation Input - Inverter module Yes
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Temperature Storage -25 to 55°C
- Temperature Operation Maximum 55°C
- Max. output frequency 598 Hz
- Max. internal resistance 0.5 Ω
- Connections 9-pin female DSUB connector
- Input current at nominal voltage Approx. 10 mA
- Power dissipation depending on switching frequency Switching frequency 5 kHz [1.2 * IM² + 2.62 * IM + 100] W
- Protective measures Open-circuit monitoring Yes
- Synchronous serial interface Data transfer rate 6.25 Mbit/s
- Relative humidity Operation 5 to 85%
- Encoder power supply Protective measures Short-circuit proof Yes
- Continuous power consumption 2.91 kW
- Nominal switching frequency 5 kHz
- Max. encoder cable length 100 m ; Depends on the cross section of the power supply wires in the encoder cable
- Certifications UL cULus E225616; Power conversion equipment
- Power dissipation depending on switching frequency Switching frequency 20 kHz [6 * IM² - 9.4 * IM + 430] W
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 0.19 Aeff per 1000 m
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Permissible mounting orientations Hanging vertically Yes
- Switching threshold High >15 V
- Dimensions Height 317 mm
- Max. power consumption 28 W + PSMC1 + PSMC2 + P24 V Out + PHoldingBrake(s)
- DC bus capacitance 165 µF
- Variant ACOPOSmulti backplane
- Max. extinction energy per switching operation 1.5 Ws
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Certifications KC In preparation
- Variant U, V, W, PE Connector
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Electrical isolation Input - Input Yes
- Input voltage 25 VDC ±1.6%
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Modulation compared to ground potential Max. ±38 V
- Module width 1
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Protective measures Short-circuit and ground fault protection Yes
- Synchronous serial interface Signal transmission RS485
- Relative humidity Storage 5 to 95%
- Dimensions Width 53 mm
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 4 mm²
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10
- Encoder power supply Protective measures Overload-proof Yes
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0014HWDS.000-3 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
