8BVI0220HWD0.000-1 B&R Electronic Components

Product Details

• Weight5.7 kg
• Terminal connection cross section Approbation data UL/C-UL-US
  30 to 10 AWG
• Variant
  ACOPOSmulti backplane
• Continuous current per motor connection
  22 Aeff
• Extinction potential
  Approx. 30 V
• Degree of protection per EN 60529
  IP20
• Power dissipation depending on switching frequency Switching frequency 5 kHz
  [0.65 * IM² - 0.35 * IM+ 64] W
• Protective measures Overload protection
  Yes
• Switching delay at nominal input voltage Enable 1 → 0, PWM off
  Max. 20.5 ms
• Relative humidity Transport
  Max. 95% at 40°C
• Fuse protection
  250 mA (slow-blow) electronic, automatic reset
• Input capacitance
  23.5 µF
• Circuit
  Sink
• Certifications CE
  Yes
• Module width
  2
• Electrical isolation Input - Input
  Yes
• Permissible mounting orientations Horizontal, face up
  Yes
• Dimensions Height
  317 mm
• B&R ID code
  0xA8E6
• Peak current per motor connection
  55 Aeff
Max. extinction energy per switching operation
3 Ws
Discharge capacitance
0.44 µF
Certifications Functional safety
Yes
Protective measures Short-circuit and ground fault protection
Yes
Electrical isolation Input - Inverter module
Yes
Permissible mounting orientations Hanging vertically
Yes
Relative humidity Storage
5 to 95%
Protective measures Undervoltage monitoring
Yes
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Temperature Transport
-25 to 70°C
Temperature Operation Nominal
5 to 40°C
Continuous power consumption
32.37 kW
Nominal switching frequency
5 kHz
Max. internal resistance
0.3 Ω
Response threshold for open-circuit monitoring
Approx. 0.5 A
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Slots for plug-in modules
2
Cooling and mounting type
Wall mounting
Possible switching frequencies
5 / 10 kHz
Terminal cable cross section dimension of shield connection
12 to 22 mm
Output voltage
24 VDC +5.8% / -0%
Modulation compared to ground potential
Max. ±38 V
Power dissipation depending on switching frequency Switching frequency 10 kHz
[2.16 * IM² - 10.912 * IM+ 190] W
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Voltage Nominal
750 VDC
Variant Shield connection
Yes
Protective measures Overload and short-circuit protection
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Overvoltage category per EN 61800-5-1
III
Certifications KC
Yes
Variant U, V, W, PE
Connector
Input voltage Maximum
30 VDC
Permissible mounting orientations Standing horizontally
No
Dimensions Depth Wall mounting
263 mm
DC bus capacitance
1320 µF
Continuous power per motor connection
16 kW
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Input voltage
25 VDC ±1.6%
Continuous current
2.1 A
Input current at nominal voltage
Approx. 30 mA
Certifications EAC
Yes
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
2.2 Aeff per 1000 m
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Switching threshold Low
<5 V
Temperature Storage
-25 to 55°C
Temperature Operation Maximum
55°C
Quantity
2
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Max. switching frequency
0.5 Hz
Certifications UL
cULus E225616; Power conversion equipment
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
0.33 A/K (starting at 40°C)
Input voltage Nominal
24 VDC
Installation elevation above sea level Nominal
0 to 500 m
Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
0.25 to 6 mm²
Max. power consumption
21 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
Max. output frequency
598 Hz
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.17 A/K (starting at -25°C)
Protective measures Open-circuit monitoring
Yes
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Relative humidity Operation
5 to 85%
Terminal connection cross section Approbation data CSA
28 to 10 AWG
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Switching threshold High
>15 V
Installation elevation above sea level Maximum
4000 m
Dimensions Width
106.5 mm

Related documents 8BVI0220HWD0.000-1 Specs