8BVI0055HWS0.000-1 B&R Electronic Components
Part#:8BVI0055HWS0.000-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti inverter module, 7.6 A, AS, wall mounting
Check out the 8BVI0055HWS0.000-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight2.7 kg
- Continuous power consumption 5.6 kW
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- B&R ID code 0x26E2
- Input current at nominal voltage Approx. 30 mA
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 0.76 Aeff per 1000 m
- Certifications UL cULus E225616; Power conversion equipment
- Switching threshold High >15 V
- Installation elevation above sea level Maximum 4000 m
- Terminal connection cross section Approbation data UL/C-UL-US 30 to 10 AWG
- Continuous power per motor connection 5.5 kW
- Input voltage 25 VDC ±1.6%
- Output voltage 24 VDC +5.8% / -0%
- Modulation compared to ground potential Max. ±38 V
- Voltage Nominal 750 VDC
- Electrical isolation Input - Input Yes
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 10 m
- Permissible mounting orientations Hanging vertically Yes
- Temperature Operation Nominal 5 to 40°C
- Max. power consumption 12 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
- Max. output frequency 598 Hz
- Continuous current 1.1 A
- Module width 1
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Permissible mounting orientations Standing horizontally No
- Dimensions Depth Wall mounting 263 mm
- Nominal switching frequency 5 kHz
- Extinction potential Approx. 30 V
- Discharge capacitance 0.14 µF
- Certifications KC Yes
- Protective measures Short-circuit and ground fault protection Yes
- Protective measures Open-circuit monitoring Yes
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves 0.25 to 6 mm²
- Relative humidity Operation 5 to 85%
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Slots for plug-in modules 2
- Response threshold for open-circuit monitoring Approx. 0.25 A
- Certifications Functional safety Yes
- Power dissipation depending on switching frequency Switching frequency 20 kHz [1.7 * IM² - 0.7 * IM + 225] W
- Variant U, V, W, PE Connector
- Temperature Storage -25 to 55°C
- Electrical isolation Input - Inverter module Yes
- Dimensions Height 317 mm
- Quantity 2
- Max. extinction energy per switching operation 1.5 Ws
- Cooling and mounting type Wall mounting
- Overvoltage category per EN 61800-5-1 III
- Power dissipation depending on switching frequency Switching frequency 10 kHz [0.97 * IM² + 0.5 * IM + 110] W
- Variant Shield connection Yes
- Switching threshold Low <5 V
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Terminal connection cross section Approbation data CSA 28 to 10 AWG
- Variant ACOPOSmulti backplane
- Possible switching frequencies 5 / 10 / 20 kHz
- Max. internal resistance 0.5 Ω
- Degree of protection per EN 60529 IP20
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz No reduction
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.13 A/K (starting at 4°C)
- Protective measures Overload and short-circuit protection Yes
- Terminal cable cross section dimension of shield connection 12 to 22 mm
- Max. switching frequency 0.5 Hz
- Certifications CE Yes
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz 0.2 A/K (starting at 49°C)
- DC bus capacitance 165 µF
- Peak current 18.9 Aeff
- Circuit Sink
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Power dissipation depending on switching frequency Switching frequency 5 kHz [0.6 * IM² + 1.3 * IM + 60] W
- Protective measures Overload protection Yes
- Input voltage Maximum 30 VDC
- Permissible mounting orientations Horizontal, face up Yes
- Relative humidity Storage 5 to 95%
- Input capacitance 23.5 µF
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Continuous current per motor connection 7.6 Aeff
- Dimensions Width 53 mm
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Temperature Operation Maximum 55°C
- Certifications EAC Yes
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Protective measures Undervoltage monitoring Yes
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Temperature Transport -25 to 70°C
- Input voltage Nominal 24 VDC
- Relative humidity Transport Max. 95% at 40°C
- Installation elevation above sea level Nominal 0 to 500 m
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0055HWS0.000-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
