8BVI0014HWD0.000-1 B&R Electronic Components

Product Details

• Weight2.8 kg
• DC bus capacitance
  165 µF
• Max. output frequency
  598 Hz
• Response threshold for open-circuit monitoring
  Approx. 0.25 A
• Certifications Functional safety
  Yes
• Switching threshold Low
  <5 V
• Insulation stress of the connected motor per IEC TS 60034-25:2004
  Limit value curve A
• Max. power consumption
  16 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
• Variant
  ACOPOSmulti backplane
• Terminal cable cross section dimension of shield connection
  12 to 22 mm
• Quantity
  2
• Output voltage
  24 VDC +5.8% / -0%
• Max. switching frequency
  0.5 Hz
• Modulation compared to ground potential
  Max. ±38 V
• Certifications CE
  Yes
• Module width
  1
• Power dissipation depending on switching frequency Switching frequency 10 kHz
  [2.56 * IM² + 2.8 * IM + 200] W
• Input voltage Maximum
  30 VDC
• Continuous power per motor connection
  1.4 kW
• OSSD signal connections
  Permitted ; Max. test pulse length: 500 µs
Circuit
Sink
Cooling and mounting type
Wall mounting
Input voltage
25 VDC ±1.6%
Peak current per motor connection
4.7 Aeff
Continuous current
1.1 A
Nominal switching frequency
5 kHz
Max. internal resistance
0.5 Ω
Max. extinction energy per switching operation
1.5 Ws
Discharge capacitance
0.2 µF
Degree of protection per EN 60529
IP20
Certifications EAC
Yes
B&R ID code
0x26DF
Input capacitance
23.5 µF
Continuous current per motor connection
1.9 Aeff
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Continuous power consumption
2.91 kW
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Slots for plug-in modules
2
Possible switching frequencies
5 / 10 / 20 kHz
Extinction potential
Approx. 30 V
Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
0.19 Aeff per 1000 m
Electrical isolation Input - Inverter module
Yes
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Dimensions Height
317 mm
Max. motor line length depending on switching frequency Switching frequency 20 kHz
10 m
Switching threshold High
>15 V
Temperature Storage
-25 to 55°C
Dimensions Depth Wall mounting
263 mm
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Relative humidity Operation
5 to 85%
Temperature Operation Nominal
5 to 40°C
Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
0.25 to 6 mm²
Relative humidity Storage
5 to 95%
Terminal connection cross section Approbation data UL/C-UL-US
30 to 10 AWG
Input current at nominal voltage
Approx. 30 mA
Overvoltage category per EN 61800-5-1
III
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Certifications KC
Yes
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
No reduction
Certifications UL
cULus E225616; Power conversion equipment
Reduction of continuous current depending on switching frequency Switching frequency 20 kHz
0.11 A/K (starting at 15°C)
Voltage Nominal
750 VDC
Power dissipation depending on switching frequency Switching frequency 5 kHz
[1.2 * IM² + 2.62 * IM + 100] W
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
No reduction
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Power dissipation depending on switching frequency Switching frequency 20 kHz
[6 * IM² - 9.4 * IM + 430] W
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Protective measures Overload protection
Yes
Max. motor line length depending on switching frequency Switching frequency 10 kHz
25 m
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Variant Shield connection
Yes
Protective measures Open-circuit monitoring
Yes
Variant U, V, W, PE
Connector
Protective measures Overload and short-circuit protection
Yes
Protective measures Short-circuit and ground fault protection
Yes
Protective measures Undervoltage monitoring
Yes
Input voltage Nominal
24 VDC
Switching delay Falling edge
53 µs ±0.5 µs (digitally filtered)
Electrical isolation Input - Input
Yes
Relative humidity Transport
Max. 95% at 40°C
Temperature Transport
-25 to 70°C
Terminal connection cross section Approbation data CSA
28 to 10 AWG
Temperature Operation Maximum
55°C
Permissible mounting orientations Hanging vertically
Yes
Installation elevation above sea level Maximum
4000 m
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Permissible mounting orientations Horizontal, face up
Yes
Installation elevation above sea level Nominal
0 to 500 m
Dimensions Width
53 mm
Permissible mounting orientations Standing horizontally
No

Related documents 8BVI0014HWD0.000-1 Specs