8BVI0880HWS0.004-1 B&R Electronic Components
Part#:8BVI0880HWS0.004-1
Manufacturer:B&R
Product Lifecycle:Active
Get a quick Quote!
ACOPOSmulti inverter module, 88 A, AS, wall mounting
Check out the 8BVI0880HWS0.004-1 B&R price in the box on the right side or send a quick quote.
Product Details
- Weight10.9 kg
- Slots for plug-in modules 2
- Peak current 176 Aeff
- Output voltage 24 VDC +5.8% / -0%
- Modulation compared to ground potential Max. ±38 V
- Certifications Functional safety Yes
- Output voltage DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC/315)
- Variant U, V, W, PE M8 threaded bolts
- Switching threshold Low <5 V
- Permissible mounting orientations Standing horizontally No
- Dimensions Height 317 mm
- Variant ACOPOSmulti backplane
- Nominal switching frequency 5 kHz
- Max. extinction energy per switching operation 3 Ws
- Power dissipation depending on switching frequency Switching frequency 5 kHz [0.03 * IM² + 7.9 * IM + 90] W
- Max. motor line length depending on switching frequency Switching frequency 5 kHz 25 m
- Input voltage Nominal 24 VDC
- Switching delay Rising edge 52 µs ±0.5 µs (digitally filtered)
- Dimensions Width 213.5 mm
- Input capacitance 32.9 µF
- Extinction potential Approx. 30 V
- Possible switching frequencies 5 / 10 / 20 kHz
- Degree of protection per EN 60529 IP20
- Power dissipation depending on switching frequency Switching frequency 10 kHz [0.11 * IM² + 11 * IM + 185] W
- Protective measures Short-circuit and ground fault protection Yes
- Protective measures Overload and short-circuit protection Yes
- Temperature Storage -25 to 55°C
- Temperature Operation Nominal 5 to 40°C
- DC bus capacitance 1980 µF
- Max. output frequency 598 Hz
- Response threshold for open-circuit monitoring Approx. 0.5 A
- Discharge capacitance 0.44 µF
- Certifications KC Yes
- Protective measures Overload protection Yes
- Input voltage Maximum 30 VDC
- Switching delay at nominal input voltage Enable 0 → 1, ready for PWM Max. 100 µs
- Relative humidity Storage 5 to 95%
- Fuse protection 250 mA (slow-blow) electronic, automatic reset
- Max. power consumption 27 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake
- Max. internal resistance 0.15 Ω
- Overvoltage category per EN 61800-5-1 III
- Power dissipation depending on switching frequency Switching frequency 20 kHz [0.17 * IM² + 27 * IM + 310] W
- Connection cross section range Flexible and fine-stranded wires ---
- Protective measures Open-circuit monitoring Yes
- Installation elevation above sea level Nominal 0 to 500 m
- Dimensions Depth Wall mounting 263 mm
- Input voltage 25 VDC ±1.6%
- B&R ID code 0xA69F
- Insulation stress of the connected motor per IEC TS 60034-25:2004 Limit value curve A
- Continuous current per motor connection 88 Aeff
- Input current at nominal voltage Approx. 30 mA
- Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
- Response threshold for undervoltage monitoring 24 VDC +0% / -4%
- Continuous power consumption 65 kW
- Terminal cable cross section dimension of shield connection 12 to 50 mm
- Circuit Sink
- Module width 4
- Reduction of continuous current depending on switching frequency Switching frequency 5 kHz 1.4 A/K (starting at 41°C)
- Variant Shield connection Yes
- Electrical isolation Input - Input Yes
- Permissible mounting orientations Horizontal, face up Yes
- Relative humidity Transport Max. 95% at 40°C
- Quantity 2
- Continuous power per motor connection 64 kW
- Max. switching frequency 0.5 Hz
- Certifications CE Yes
- Certifications EAC Yes
- Reduction of continuous current depending on switching frequency Switching frequency 20 kHz 0.56 A/K (starting at -90°C)
- Protective measures Undervoltage monitoring Yes
- Permissible mounting orientations Hanging vertically Yes
- Cooling and mounting type Wall mounting
- Continuous current 4.2 A
- OSSD signal connections Permitted ; Max. test pulse length: 500 µs
- Certifications UL cULus E225616; Power conversion equipment
- Reduction of continuous current depending on switching frequency Switching frequency 10 kHz 0.92 A/K (starting at -5°C)
- Max. motor line length depending on switching frequency Switching frequency 20 kHz 25 m
- Switching delay at nominal input voltage Enable 1 → 0, PWM off Max. 20.5 ms
- Temperature Transport -25 to 70°C
- Voltage Nominal 750 VDC
- Output voltage DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
- Reduction of continuous current depending on installation elevation Starting at 500 m above sea level 8.8 Aeff per 1000 m
- Relative humidity Operation 5 to 85%
- Max. motor line length depending on switching frequency Switching frequency 10 kHz 25 m
- Switching delay Falling edge 53 µs ±0.5 µs (digitally filtered)
- Temperature Operation Maximum 55°C
- Electrical isolation Input - Inverter module Yes
- Switching threshold High >15 V
- Installation elevation above sea level Maximum 4000 m
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8BVI0880HWS0.004-1 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of B&R
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
B&R Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many B&R Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from B&R, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
