8BVI0220HWD0.000-3 B&R Electronic Components

Product Details

• Weight5.7 kg
• Cooling and mounting type
  Wall mounting
• Quantity
  2
• Max. internal resistance
  0.3 Ω
• Overvoltage category per EN 61800-5-1
  III
• Certifications EAC
  Yes
• Max. motor line length depending on switching frequency Switching frequency 10 kHz
  25 m
• Electrical isolation Input - Input
  Yes
• Temperature Storage
  -25 to 55°C
• Terminal connection cross section Approbation data CSA
  28 to 10 AWG
• Max. output frequency
  598 Hz
• Circuit
  Sink
• Input voltage
  25 VDC ±1.6%
• Certifications Functional safety
  Yes
• Reduction of continuous current depending on installation elevation Starting at 500 m above sea level
  2.2 Aeff per 1000 m
• Electrical isolation Input - Inverter module
  Yes
• Switching delay Falling edge
  53 µs ±0.5 µs (digitally filtered)
• Relative humidity Operation
  5 to 85%
• Possible switching frequencies
  5 / 10 kHz
• Response threshold for open-circuit monitoring
  Approx. 0.5 A
DC bus capacitance
1320 µF
Certifications CE
Yes
Reduction of continuous current depending on switching frequency Switching frequency 5 kHz
0.33 A/K (starting at 40°C)
Protective measures Open-circuit monitoring
Yes
Switching delay at nominal input voltage Enable 1 → 0, PWM off
Max. 20.5 ms
Temperature Transport
-25 to 70°C
Temperature Operation Nominal
5 to 40°C
Nominal switching frequency
5 kHz
Max. extinction energy per switching operation
3 Ws
Pollution degree per EN 61800-5-1
2 (non-conductive pollution)
Input capacitance
23.5 µF
Output voltage DC bus voltage (UDC): 260 to 315 VDC
25 VDC * (UDC/315)
Max. motor line length depending on switching frequency Switching frequency 5 kHz
25 m
Permissible mounting orientations Hanging vertically
Yes
Dimensions Width
106.5 mm
Peak current per motor connection
55 Aeff
Max. switching frequency
0.5 Hz
Variant
ACOPOSmulti backplane
Degree of protection per EN 60529
IP20
Certifications UL
cULus E225616; Power conversion equipment
Variant Shield connection
Yes
Switching delay at nominal input voltage Enable 0 → 1, ready for PWM
Max. 100 µs
Relative humidity Storage
5 to 95%
B&R ID code
0xF374
Continuous power per motor connection
16 kW
Extinction potential
Approx. 30 V
Discharge capacitance
0.44 µF
Power dissipation depending on switching frequency Switching frequency 5 kHz
[0.65 * IM² - 0.35 * IM+ 64] W
Protective measures Overload protection
Yes
Input voltage Nominal
24 VDC
Installation elevation above sea level Maximum
4000 m
Dimensions Height
317 mm
Note
Optimized for applications with decentralized, computationally intensive open-loop and closed-loop control requirements
Max. power consumption
21 W + PSLOT1 + PSLOT2 + P24 V Out + PHoldingBrake(s)
Output voltage
24 VDC +5.8% / -0%
OSSD signal connections
Permitted ; Max. test pulse length: 500 µs
Variant U, V, W, PE
Connector
Power dissipation depending on switching frequency Switching frequency 10 kHz
[2.16 * IM² - 10.912 * IM+ 190] W
Switching threshold Low
<5 V
Installation elevation above sea level Nominal
0 to 500 m
Terminal connection cross section Approbation data UL/C-UL-US
30 to 10 AWG
Slots for plug-in modules
2
Insulation stress of the connected motor per IEC TS 60034-25:2004
Limit value curve A
Response threshold for undervoltage monitoring
24 VDC +0% / -4%
Module width
2
Reduction of continuous current depending on switching frequency Switching frequency 10 kHz
0.17 A/K (starting at -25°C)
Protective measures Undervoltage monitoring
Yes
Switching delay Rising edge
52 µs ±0.5 µs (digitally filtered)
Relative humidity Transport
Max. 95% at 40°C
Dimensions Depth Wall mounting
263 mm
Continuous current per motor connection
22 Aeff
Continuous current
2.1 A
Continuous power consumption
32.37 kW
Modulation compared to ground potential
Max. ±38 V
Output voltage DC bus voltage (UDC): 315 to 800 VDC
24 VDC ±6%
Protective measures Overload and short-circuit protection
Yes
Switching threshold High
>15 V
Permissible mounting orientations Standing horizontally
No
Terminal connection cross section Flexible and fine-stranded wires With wire end sleeves
0.25 to 6 mm²
Fuse protection
250 mA (slow-blow) electronic, automatic reset
Terminal cable cross section dimension of shield connection
12 to 22 mm
Input current at nominal voltage
Approx. 30 mA
Voltage Nominal
750 VDC
Protective measures Short-circuit and ground fault protection
Yes
Input voltage Maximum
30 VDC
Permissible mounting orientations Horizontal, face up
Yes
Temperature Operation Maximum
55°C

Related documents 8BVI0220HWD0.000-3 Specs