Contactors

11B115L00110C110

11B115L00110C110 Lovato - Three-pole contactor, IEC operating current Ie (AC3) = 110A, AC/DC coil, already fitted with mechanical latch (G495), 110...125VAC/DC, mechanical latch 110...125VDC

Lovato Electric

AF12-30-10-14L

ABB Control - AF12-30-10-14L

ABB Control

CA7-9-M40-240

Contactor, 4 Pole, Non-Reversing, 32A, 4x NO Auxiliary Contacts, 220/240 VAC Coil

Sprecher + Schuh

AF116-30-22B-14

AF116-30-22B-14 ABB Control - CTR,3P,104A,250-500VAC/DC,2/2

ABB Control

LC2D12ED

Schneider Electric LC2D12ED is a pre-assembled reversing magnetic contactor from the Deca sub-range, featuring a mechanical interlock and screw connections. It is equipped with 2 x 3-poles (2x3P; 2x3NO) and has a rated current of 25A (AC-1) and 12A (440Vac; AC-3). The contactor offers a degree of protection of IP20 and operates with a control voltage (DC) range of 36-60Vdc (48Vdc nominal; 0.75...1.25 x Uc). Its rated operating voltage (Ue) is up to 690 V, and it includes 2 Normally Open (NO) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV. The rated active power (kW) spans from 3kW at 220-230Vac (AC-3) up to 7.5kW at 660-690Vac (AC-3). It also features 2 Normally Closed (NC) auxiliary contacts and 1NO+1NC instantaneous auxiliary contacts per contactor. The rated power (HP) ranges from 0.5HP at 115Vac (single-phase; 50Hz/60Hz; UL/CSA) to 10HP at 575-600Vac (3-phase; 50Hz/60Hz; UL/CSA), with a rated voltage (AC) - phase-to-phase of 690 V.

Schneider Electric

CWCA0-22-00C03

WEG CWCA0-22-00C03 - MINICONTACTOR BU CWCA0-22-00C03, Miniature Contactors (CWC)

WEG

J7KN-22D-01 24

Omron J7KN-22D-01 24 - Contactor

Omron

1SFL427101R1100

ABB 1SFL427101R1100 is a magnetic contactor designed with screw-clamp connections and rated for a current of up to 160A at 690Vac. It features normally open auxiliary contacts, with a rated impulse voltage of 8 kV and technology that supports a control voltage range of 20-60Vdc, specifically optimized for 24Vdc to 48Vdc. The contactor is equipped to handle a short circuit breaking rating of 24Vac-60Vac and operates efficiently within an ambient air temperature range suitable for both operation and storage as specified for AC-3 conditions. It offers a degree of protection in compliance with UL/CSA general use ratings and is designed for mounting on a plate. The dimensions of this 4-pole (4P) contactor are specified at 120 mm, with a cross-section for 4NO contacts, and it supports a primary voltage for 3-phase networks at 50Hz/60Hz. The device is capable of an operating rate of 300 cycles/hour at no load and under AC-1 conditions, showcasing its suitability for a wide range of industrial applications.

ABB Control

11B250400110

11B250400110 Lovato - Four-pole contactor, IEC operating current Ith (AC1) = 350A, AC/DC coil, 110...125VAC/DC

Lovato Electric

BF26T0A240

BF26T0A240 Lovato - 4P CONTACTOR 26A 4NC 240V AC COIL 50/60Hz

Lovato Electric

AF305-40-22-13

AF305-40-22-13 ABB Control - CONTACTOR AF305 4P 2NO2NC 100-250V

ABB Control

AF09-30-01-13

AF09-30-01-13 ABB Control - AF09 3P CONTR, 1NC, 100-250VAC/D

ABB Control

11BG0910D060

11BG0910D060 Lovato - Three-pole contactor, IEC operating current Ie (AC3) = 9A, DC coil, 60VDC, 1NO auxiliary contact

Lovato Electric

11BGF0022L024

11BGF0022L024 Lovato - Control relay with DC coil low consumption, 24VDC, 2NO and 2NC, Faston terminals

Lovato Electric

AF30R-30-02-12

REV. 3-P. 25HP 600VAC, COIL 48-130V

ABB Control

11B14500380

11B14500380 Lovato - Three-pole contactor, IEC operating current Ie (AC3) = 150A, AC/DC coil, 380...415VAC/DC

Lovato Electric

CWCI09-10-30C03

WEG CWCI09-10-30C03 - MINICONTACTOR BU CWCI09-10-30C03, Miniature Contactors (CWC)

WEG

11B4000048

11B4000048 Lovato - Three-pole contactor, IEC operating current Ie (AC3) = 420A, AC/DC coil, 48VAC/DC

Lovato Electric

1SBH137001R4162

ABB 1SBH137001R4162 is a magnetic contactor designed with screw-clamp connections for secure installation. It operates at a rated current of 6A for voltages between 24-127Vac, 4A for 220-240Vac, 3A for 400-440Vac, and 2A for 500Vac and 690Vac under AC-15 conditions. This contactor features normally open auxiliary contacts rated for AC-15 use, supporting a supply voltage of 0 NO contacts. It offers protection with a rated insulation voltage of 6 kV and a net depth of 45 mm. The control voltage is AC with 2 x 4-poles (2x4P / 8P) for mounting, and it utilizes technology compliant with IEC/VDE at 690 V and UL/CSA at 600 V standards. The power consumption ranges from 24Vac to 60Vac (36Vac / 48Vac) at 50Hz/60Hz, and it is designed for mounting on DIN rail. The rated operating voltage (Ue) is 690 V, and it has an electrical durability for NF62E 8-pole contactors. The contactor has a resistance of 50VA inrush and 2.2VA holding for the coil.

ABB Control

CWMC65-10-30X30

WEG CWMC65-10-30X30 - CONTACTOR CWMC65-10-30X30, Contactors (CWM)

WEG