Name: ATV61HU75Y
Brand: Schneider Electric

ATV61HD22N4

Schneider Electric ATV61HD22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that can be set at 2 points, 5 points, or for energy saving. It features sensorless flux vector control in standard or energy-saving modes and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model includes a built-in DC choke, an EMC filter of class C2 or C3, and a built-in heatsink. It operates on a supply voltage of 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. The dimensions are H420mm x W240mm x D236mm, with an IP20 UL type 1 degree of protection. The rated current is 48A at 380Vac and 12kHz, 40A at 460Vac and 12kHz, with a maximum current of 57.6A for 60. It is designed for wall mounting and uses Modbus and CANopen communication protocols. The network is 3-phase (3P) with an output frequency range of 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable as LI1-LI5, 1 digital input programmable as discrete or PTC input, and 1 PWR safety input. Additionally, it has 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact), along with 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is 50A at 380Vac and 42A at 480Vac, with a rated active power of 22kW and rated power of 30HP.

Schneider Electric

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630D22N4

Verified stock: 0

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

ATV630U75N4

Verified stock: 0

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV61HC40N4

Verified stock: 0

Schneider Electric ATV61HC40N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 323-528Vac, including nominal voltages of 380Vac, 400Vac, 480Vac, and 500Vac. It features sensorless flux vector control, vector control without speed feedback, and can deliver 120% of the nominal motor torque. The unit comes with a built-in DC choke, EMC filter (class C2/C3), and a built-in heatsink. It has a conformal coating for enhanced chemical resistance and is rated IP20 UL type 1 for protection. The ATV61HC40N4 supports wall mounting and uses Modbus and CANopen communication protocols. It operates within an output network frequency range of 0.1-500 Hz and includes one analog output (0-10Vdc / 0-20mA), five digital inputs (24Vdc; sink/source) plus one programmable as discrete or PTC input and one for PWR safety, along with two digital outputs (one C/O SPDT relay contact and one NO relay contact). It also features two analog inputs (-10...+10Vdc and 0-10Vdc / 0-20mA). The rated current is 759A at 380Vac and 2.5kHz, with a maximum current of 910.8A for 60 seconds. Dimensions are H1390mm x W890mm x D377mm. Current consumption varies with voltage and power, supporting 355kW and 400kW rated active power, equivalent to 600HP.

Schneider Electric

ATV61HC50N4

Verified stock: 0

Schneider Electric ATV61HC50N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that supports 2 points, 5 points, and energy-saving modes. It features sensorless flux vector control in standard and energy-saving modes, and vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model includes a DC choke, an EMC filter of class C2 or C3, a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 323-528Vac, accommodating 380Vac, 400Vac, 480Vac, and 500Vac nominal values, and has dimensions of H1390mm x W890mm x D377mm. The ATV61HC50N4 is equipped with a conformal coating for chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 941A at 380Vac and 460Vac with a 2.5kHz frequency, reaching up to 1129.2A max current for 60 seconds. It is designed for wall mounting and uses Modbus and CANopen communication protocols. This 3-phase network device outputs frequencies ranging from 0.1-500 Hz and includes 1 analog output, 5 digital inputs plus 1 additional programmable digital input, and 2 digital outputs. It also features 2 analog inputs for comprehensive connectivity. The current consumption is 876A at 380Vac and 760A at 480Vac, with a rated active power of 500kW and a rated power of 700HP.

Schneider Electric

ATV61HC63N4D

Verified stock: 0

Schneider Electric ATV61HC63N4D is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that can be set at 2 points, 5 points, or for energy saving. It features sensorless flux vector control in standard or energy-saving modes and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model comes with a built-in EMC filter, a built-in heatsink, and a coated version without a DC choke. It operates on a supply voltage of 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages, and has dimensions of H1390mm x W1120mm x D377mm. The ATV61HC63N4D is designed with conformal coating for enhanced chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 1188A at 460Vac and 2.5kHz, with a maximum current of 1425.6A for 60 seconds. It is suitable for wall mounting and uses Modbus and CANopen communication protocols. This 3-phase network-compatible device outputs frequencies ranging from 0.1 to 500 Hz and includes 1 analog output, 5 programmable digital inputs plus 1 additional digital input that can be programmed as discrete or PTC input, and 2 digital outputs. It also features 2 analog inputs and has a current consumption profile suited for applications requiring 560kW to 630kW of rated active power, equivalent to 800HP to 900HP.

Schneider Electric

ATV61HD15M3X

Verified stock: 0

Schneider Electric ATV61HD15M3X is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series, designed with a built-in heatsink. It operates on a supply voltage of 170-264Vac, compatible with 200Vac, 220Vac, 230Vac, and 240Vac nominal voltages. This model features dimensions of H400mm x W230mm x D213mm and offers an IP20 UL type 1 degree of protection. It has a rated current of 66A at 230Vac with a 12kHz frequency and can handle a maximum current of 79.2A for up to 60 seconds. Wall mounting is the prescribed installation method. Communication is facilitated through Modbus and CANopen protocols, and it is designed for a 3-phase network with an output frequency range of 0.1-599 Hz. The ATV61HD15M3X includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) that are programmable (LI1-LI5), plus 1 digital input (24Vdc; sink/source) programmable as discrete or PTC input (LI6), and 1 digital input (24Vdc) for PWR safety. Additionally, it features 1 digital output (C/O SPDT relay contact) (R1) and 1 digital output (NO relay contact) (R2), alongside 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). Its current consumption is 71.7A at 200Vac and 61.6A at 240Vac, with a rated active power of 15kW and rated power of 20HP.

Schneider Electric

ATV61HD22N4

Verified stock: 0

Schneider Electric ATV61HD22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that can be set at 2 points, 5 points, or for energy saving. It features sensorless flux vector control in standard or energy-saving modes and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model includes a built-in DC choke, an EMC filter of class C2 or C3, and a built-in heatsink. It operates on a supply voltage of 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. The dimensions are H420mm x W240mm x D236mm, with an IP20 UL type 1 degree of protection. The rated current is 48A at 380Vac and 12kHz, 40A at 460Vac and 12kHz, with a maximum current of 57.6A for 60. It is designed for wall mounting and uses Modbus and CANopen communication protocols. The network is 3-phase (3P) with an output frequency range of 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable as LI1-LI5, 1 digital input programmable as discrete or PTC input, and 1 PWR safety input. Additionally, it has 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact), along with 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is 50A at 380Vac and 42A at 480Vac, with a rated active power of 22kW and rated power of 30HP.

Schneider Electric

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630D22N4

Verified stock: 0

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

ATV630U75N4

Verified stock: 0

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV61HC40N4

Verified stock: 0

Schneider Electric ATV61HC40N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 323-528Vac, including nominal voltages of 380Vac, 400Vac, 480Vac, and 500Vac. It features sensorless flux vector control, vector control without speed feedback, and can deliver 120% of the nominal motor torque. The unit comes with a built-in DC choke, EMC filter (class C2/C3), and a built-in heatsink. It has a conformal coating for enhanced chemical resistance and is rated IP20 UL type 1 for protection. The ATV61HC40N4 supports wall mounting and uses Modbus and CANopen communication protocols. It operates within an output network frequency range of 0.1-500 Hz and includes one analog output (0-10Vdc / 0-20mA), five digital inputs (24Vdc; sink/source) plus one programmable as discrete or PTC input and one for PWR safety, along with two digital outputs (one C/O SPDT relay contact and one NO relay contact). It also features two analog inputs (-10...+10Vdc and 0-10Vdc / 0-20mA). The rated current is 759A at 380Vac and 2.5kHz, with a maximum current of 910.8A for 60 seconds. Dimensions are H1390mm x W890mm x D377mm. Current consumption varies with voltage and power, supporting 355kW and 400kW rated active power, equivalent to 600HP.

Schneider Electric

ATV61HC50N4

Verified stock: 0

Schneider Electric ATV61HC50N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that supports 2 points, 5 points, and energy-saving modes. It features sensorless flux vector control in standard and energy-saving modes, and vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model includes a DC choke, an EMC filter of class C2 or C3, a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 323-528Vac, accommodating 380Vac, 400Vac, 480Vac, and 500Vac nominal values, and has dimensions of H1390mm x W890mm x D377mm. The ATV61HC50N4 is equipped with a conformal coating for chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 941A at 380Vac and 460Vac with a 2.5kHz frequency, reaching up to 1129.2A max current for 60 seconds. It is designed for wall mounting and uses Modbus and CANopen communication protocols. This 3-phase network device outputs frequencies ranging from 0.1-500 Hz and includes 1 analog output, 5 digital inputs plus 1 additional programmable digital input, and 2 digital outputs. It also features 2 analog inputs for comprehensive connectivity. The current consumption is 876A at 380Vac and 760A at 480Vac, with a rated active power of 500kW and a rated power of 700HP.

Schneider Electric

ATV61HC63N4D

Verified stock: 0

Schneider Electric ATV61HC63N4D is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that can be set at 2 points, 5 points, or for energy saving. It features sensorless flux vector control in standard or energy-saving modes and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model comes with a built-in EMC filter, a built-in heatsink, and a coated version without a DC choke. It operates on a supply voltage of 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages, and has dimensions of H1390mm x W1120mm x D377mm. The ATV61HC63N4D is designed with conformal coating for enhanced chemical resistance, an IP20 UL type 1 degree of protection, and supports a rated current of 1188A at 460Vac and 2.5kHz, with a maximum current of 1425.6A for 60 seconds. It is suitable for wall mounting and uses Modbus and CANopen communication protocols. This 3-phase network-compatible device outputs frequencies ranging from 0.1 to 500 Hz and includes 1 analog output, 5 programmable digital inputs plus 1 additional digital input that can be programmed as discrete or PTC input, and 2 digital outputs. It also features 2 analog inputs and has a current consumption profile suited for applications requiring 560kW to 630kW of rated active power, equivalent to 800HP to 900HP.

Schneider Electric

ATV61HD15M3X

Verified stock: 0

Schneider Electric ATV61HD15M3X is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series, designed with a built-in heatsink. It operates on a supply voltage of 170-264Vac, compatible with 200Vac, 220Vac, 230Vac, and 240Vac nominal voltages. This model features dimensions of H400mm x W230mm x D213mm and offers an IP20 UL type 1 degree of protection. It has a rated current of 66A at 230Vac with a 12kHz frequency and can handle a maximum current of 79.2A for up to 60 seconds. Wall mounting is the prescribed installation method. Communication is facilitated through Modbus and CANopen protocols, and it is designed for a 3-phase network with an output frequency range of 0.1-599 Hz. The ATV61HD15M3X includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) that are programmable (LI1-LI5), plus 1 digital input (24Vdc; sink/source) programmable as discrete or PTC input (LI6), and 1 digital input (24Vdc) for PWR safety. Additionally, it features 1 digital output (C/O SPDT relay contact) (R1) and 1 digital output (NO relay contact) (R2), alongside 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). Its current consumption is 71.7A at 200Vac and 61.6A at 240Vac, with a rated active power of 15kW and rated power of 20HP.

Schneider Electric

ATV61HD22N4

Verified stock: 0

Schneider Electric ATV61HD22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control with a U/F ratio that can be set at 2 points, 5 points, or for energy saving. It features sensorless flux vector control in standard or energy-saving modes and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. This model includes a built-in DC choke, an EMC filter of class C2 or C3, and a built-in heatsink. It operates on a supply voltage of 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. The dimensions are H420mm x W240mm x D236mm, with an IP20 UL type 1 degree of protection. The rated current is 48A at 380Vac and 12kHz, 40A at 460Vac and 12kHz, with a maximum current of 57.6A for 60. It is designed for wall mounting and uses Modbus and CANopen communication protocols. The network is 3-phase (3P) with an output frequency range of 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) programmable as LI1-LI5, 1 digital input programmable as discrete or PTC input, and 1 PWR safety input. Additionally, it has 1 digital output (C/O SPDT relay contact) and 1 digital output (NO relay contact), along with 1 analog input (-10...+10Vdc) and 1 analog input (0-10Vdc / 0-20mA). The current consumption is 50A at 380Vac and 42A at 480Vac, with a rated active power of 22kW and rated power of 30HP.

Schneider Electric

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630D22N4

Verified stock: 0

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

ATV630U75N4

Verified stock: 0

Schneider Electric ATV630U75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H350mm x W171mm x D203mm, and a degree of protection of IP21 UL type 1. The rated current is 16.5A (normal-duty; 4kHz), 12.7A (heavy-duty; 4kHz), with a maximum current of 18.2A (normal-duty; for 60s) and 19.1A (heavy-duty; for 60s). It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. There are also 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs for various signal types. The current consumption is specified for different voltages and duties, with a rated active power of 7.5kW (normal-duty) and 5.5kW (heavy-duty), corresponding to 10HP (normal-duty) and 7.5HP (heavy-duty).

Schneider Electric

ATV61HU75Y Schneider Electric Industrial Automation Components

Part#:ATV61HU75Y

Manufacturer:Schneider Electric

Product condition

ATV61HU75Y Description

Schneider Electric Disclaimer:

Relevant products

ATV61HD22N4

ATV630D18N4

ATV630D22N4

ATV630U75N4

ATV61HC40N4

ATV61HC50N4

ATV61HC63N4D

ATV61HD15M3X

ATV61HD22N4

ATV630D18N4

ATV630D22N4

ATV630U75N4

ATV61HC40N4

ATV61HC50N4

ATV61HC63N4D

ATV61HD15M3X

ATV61HD22N4

ATV630D18N4

ATV630D22N4

ATV630U75N4

We are a proud member of: